Development of A Depth-Integrated Longshore Current Model with Unstructured Grids     

陈超  张庆河 《海洋工程》2016,(5):718-732

A depth-integrated model for simulating wave-induced longshore current was developed with unstructured grids. Effects of surface roller and horizontal mixing under combined waves and currents were incorporated in the numerical model. Recommended values of model coefficients were also proposed based on sensitivity analysis. Field observations and three series of laboratory measurements including two cases conducted on the plane beach and one implemented on the ideal inlet were employed to examine the predictive capability of this model. For the field case and laboratory cases conducted on the plane beach, numerical results were compared favorably with the measured data. For the case with an ideal inlet, simulated circulation pattern is supposed to be reasonable although some deviations between numerical results and measured data still can be detected.  相似文献   

Rotation Center and Horizontal Bearing Capacity of the Bucket Foundation in Soft Ground     

Xiaowei Tang  Xiwen Zhang  Qi Shao  Zhenqing Li 《Marine Georesources & Geotechnology》2016,34(6):594-601

In the last 20 years, the bucket foundation has been developed as a new type of offshore platform structure. Because of its short period of application to engineering practices, the theoretical decision on the rotation center and horizontal bearing capacity of the bucket foundation has yet to be agreed. A limit analysis method is used to determine the updated rotation center position and horizontal bearing capacity to evaluate the failure mechanisms of the bucket foundations. The results are compared with numerical simulation and experiments, and also with other theoretical methods. The proposed method can satisfactorily consider the engineering conditions and the result is accurate in determining the rotation center and horizontal bearing capacity.  相似文献   

苏里格大型致密砂岩气田储层结构与水平井提高采收率对策     

吕志凯  唐海发  刘群明  李小锋  王泽龙 《现代地质》2018,32(4):832

在分析苏里格气田辫状河体系及储层结构特征的基础上,提出了剖面储量集中度的概念,建立了厚层块状型、垂向叠置泛连通型、分散局部连通型、分散孤立型4种砂体分布模式,探讨了不同储层结构下的水平井采出程度,提出了水平井提高采收率技术对策。研究结果表明,辫状河沉积体系复合有效砂体由于“阻流带”的存在,直井动用不完善,水平井能克服“阻流带”的影响,提高层内储量动用程度;但由于砂体多层状分散分布,水平井开发会导致纵向含气层系储量动用不充分,影响层间采出程度。对于剖面储量集中度高的厚层块状型、垂向叠置泛连通型储层,采用水平井整体开发,Ⅰ+Ⅱ类井比例达70%以上,可显著提高储量动用程度和采收率。对于剖面储量集中度低的分散局部连通型储层,采用直井井网开发后进行甜点式优选水平井井位加密部署,可提高采收率10%以上。  相似文献   

红河油田低压易漏地层水平段固井技术          下载免费PDF全文

闫吉曾 《探矿工程》2018,45(5):40-45

为提高红河油田水平井固井质量,满足后期分段压裂需求,对红河油田水平井固井技术进行了研究。针对红河油田水平段固井技术难点,通过室内和现场试验,优选出了GSJ水泥浆体系,基于实测地层压力与地层破裂压力,进行平衡压力固井设计确定了环空浆体结构,为提高顶替效率,优化了扶正器类型与加放位置,专业软件模拟表明套管居中度＞73%,良好的井眼准备和套管漂浮措施确保了管柱的顺利下入;加长胶塞、树脂滚轮刚性旋流扶正器和关井阀等附件的使用,保证了固井质量。现场应用53口水平井,水泥浆全部返至地面,CBL测井结果表明,固井优良率达81.13%。该固井技术成功应用于红河油田水平井中,保证了固井质量,满足了后期分段压裂的需要。  相似文献   

考虑方位漂移的水平井井眼轨道设计   总被引：1，自引：1，他引：0       下载免费PDF全文

王世栋  张志刚  耿雪樵  于彦江  陈奇 《探矿工程》2018,45(7):14-18

目前,深层页岩气水平井在钻井过程中经常出现方位漂移的问题,方位漂移严重影响了水平井的井眼轨迹控制,进而影响水平井的准确中靶。在现场施工中,通常根据施工区以前的钻井经验,在进行定向造斜时,先估计出一个“方位超前角”,这种现场的做法有着很大的不确定性,并且可能出现较大误差。本文提出了考虑方位漂移的水平井井眼轨道优化设计的方法,解决了仅凭现场经验给出的“超前角”不准确的问题。考虑方位漂移的水平井井眼轨道优化设计按照井段划分,将地层因素与井身剖面结合起来求取井段的平均方位漂移率。根据该方法研制开发了考虑方位漂移的水平井井眼轨道优化设计软件,并通过举例进行了验证,证明了方法是可行的。  相似文献   

地质导向技术在L型煤层气水平井 T-P05井中的应用          下载免费PDF全文

郭宝林  李琪  张兴龙  聂涛  于建克  李盟国 《探矿工程》2018,45(1):9-13

通过分析山西L型煤层气水平井的技术难点,着重建立造斜着陆与水平段导向两大导向模型,形成了以标志层划分与对比、地层倾角推算、地质建模和实时轨迹控制四个方面为主的L型煤层气水平井地质导向技术流程,该技术在T-P05井的成功应用,不仅丰富了煤层气水平井地质导向技术的内容与方法,更进一步验证了该技术在现场具有较强的可操作性和良好的应用前景,值得大力推广。  相似文献   

隆页2HF页岩气水平井钻井技术研究与实践   总被引：1，自引：1，他引：0       下载免费PDF全文

王彦祺  龙志平 《探矿工程》2018,45(7):30-33

四川盆地周缘蕴藏有大面积常压低丰度海相页岩气,依目前的开发成本,储量难以动用,亟需开展低成本钻井工程工艺技术攻关,盘活该类页岩气资源。中石化华东油气分公司在渝东南武隆地区从钻、测、录、固等方面开展了低成本钻井技术研究。通过分析导致钻井成本高的原因,重点从井身结构优化、井眼轨迹控制优化、钻井工具优选、防漏堵漏措施以及测井、录井、固井工艺优化等方面进行了技术研究与现场实践,试验井隆页2HF井由导眼井与侧钻水平井两部分构成,钻井成本较邻井降低了30%,为武隆地区常压页岩气开发奠定了基础。  相似文献   

Discussion on the dextral movement and its effect in continental China and adjacent areas since Cenozoic     

《China Geology》2018,1(4):522-539

Continental China has moved dextral Eastward since Cenozoic time, driven by the collision of the Indian with the Eurasian plate. Evidence for this comes from landscape evolution, the distribution of earthquake epicenters, Cenozoic sedimentary and volcanic rocks, and the measurement of GPS velocity vectors, the distribution of crustal stress, paleomagnetic data, and deep mantle structure, among others. This movement commenced around 40 Ma, coupled with thickened lithosphere and widespread stress release along strike-slip faults that bound the continental Chinese block. Because of continued Northward subduction of the Indian plate, manifestation of the dextral movement has intensified since 25 Ma. Far-reaching effects include extensive strike-slip movement on the Tan-Lu fault in Eastern China, formation of the Dabie ultrahigh pressure metamorphic terrane, extensive thrust faults in East China, delamination and thickening of the lithosphere of South China, a possible tectonic doubling of the Middle-Lower Yangtze Valley metallogenic belt, and the formation of the Japan, Huanghai (East China), and South China Sea.  相似文献   

CWRF对青藏高原气温和降水模拟效果的综合评估          下载免费PDF全文

徐蓉蓉  梁信忠  段明铿 《大气科学学报》2021,44(1):104-117

利用CWRF(Climate-Weather Research and Forecasting model)对中国区域气候的31 a多物理集合模拟试验,分析了该模式对青藏高原气温和降水的模拟效果及其对水平分辨率和物理过程参数化方案的敏感性。结果表明:1)CWRF降尺度全面改善了全球模式对高原气温和降水的模拟,使气温年循环的均方根误差减小近1℃,月降水量年循环的均方根误差减小10~40 mm,同时显著提高了各月气温和降水与实测资料年际变化的相关系数,最高提升0.6;2)模式分辨率对降水模拟有显著影响,不同分辨率模拟降水差异高达60 mm(54%),模拟偏差随分辨率提高先降低后上升,转折在30 km左右;3)物理过程参数化方案对气温和降水模拟影响显著,不同方案模拟的各月平均气温相差1~4℃,夏季各月降水量相差20~100 mm,其中对气温模拟影响最大的是辐射方案,对降水影响最大的是积云方案。本文为CWRF局地优化对物理参数化及水平分辨率等如何选择提供了依据。  相似文献   

Design principles for origin-destination flow maps     

Bernhard Jenny  Daniel M. Stephen  Ian Muehlenhaus  Brooke E. Marston  Ritesh Sharma  Eugene Zhang 《制图学和地理信息科学》2018,45(1):62-75

Origin-destination flow maps are often difficult to read due to overlapping flows. Cartographers have developed design principles in manual cartography for origin-destination flow maps to reduce overlaps and increase readability. These design principles are identified and documented using a quantitative content analysis of 97 geographic origin-destination flow maps without branching or merging flows. The effectiveness of selected design principles is verified in a user study with 215 participants. Findings show that (a) curved flows are more effective than straight flows, (b) arrows indicate direction more effectively than tapered line widths, and (c) flows between nodes are more effective than flows between areas. These findings, combined with results from user studies in graph drawing, conclude that effective and efficient origin-destination flow maps should be designed according to the following design principles: overlaps between flows are minimized; symmetric flows are preferred to asymmetric flows; longer flows are curved more than shorter or peripheral flows; acute angles between crossing flows are avoided; sharp bends in flow lines are avoided; flows do not pass under unconnected nodes; flows are radially distributed around nodes; flow direction is indicated with arrowheads; and flow width is scaled with represented quantity.  相似文献